Best Entrance Matting UK 2026: Complete Comparison
Effective entrance matting protects interior flooring, reduces cleaning costs, and improves safety. This comprehensive guide covers everything from basic barrier mats to sophisticated recessed systems, helping you choose the right solution for your building.
Key Takeaways
Best High-Traffic
Nuway Tuftiguard
Best for Offices
Forbo Coral Brush
Best Wet Weather
Andersen Waterhog
Best Industrial
Safe-Flex
Why Entrance Matting Matters
The Problem
Up to 80% of dirt in buildings enters through the front door on people's feet. Without effective entrance matting, this dirt spreads throughout the building, damaging flooring, increasing cleaning costs, and creating slip hazards when wet.
In the UK's wet climate, moisture management is equally important. Wet floors cause slips and falls — one of the most common workplace injuries. Proper entrance matting addresses both dirt and moisture.
The Solution
Effective entrance matting creates a transition zone that captures dirt and absorbs moisture before people reach interior flooring. Studies show properly specified entrance matting can reduce interior cleaning costs by up to 65%.
The key is sufficient matting length (6-8 steps minimum) and choosing the right products for your traffic levels, building type, and climate exposure.
of building dirt enters through entrances
reduction in cleaning costs with proper matting
minimum matting length for effectiveness
The Three-Zone Matting System
The most effective entrance matting uses three zones, each performing a specific function. This system provides maximum dirt and moisture capture.
Zone 1: Scraper
Outside / Entrance
Removes heavy soil and debris from footwear. Typically uses aggressive scraping surfaces — rubber fingers, coarse bristles, or raised profiles. Located outside or in covered entrance areas.
Recommended Products:
- • Rubber scraper mats
- • Coir matting
- • Aluminium scraper grids
Zone 2: Scraper/Wiper
Vestibule / Lobby
Combination zone that continues dirt removal while beginning moisture absorption. Uses textured surfaces with absorbent fibres. Located in vestibules, lobbies, or just inside doors.
Recommended Products:
- • Waterhog-style mats
- • Ribbed textile matting
- • Dual-function tiles
Zone 3: Wiper/Finisher
Interior / Reception
Final moisture absorption and fine particle removal. Uses soft, absorbent textiles that are comfortable underfoot and can be designed to complement interior décor.
Recommended Products:
- • Coral Brush tiles
- • Milliken Obex
- • Plush textile matting
Quick Comparison
| Product | Brand | Type | Moisture | Dirt | Best For | Price |
|---|---|---|---|---|---|---|
| Nuway Tuftiguard | Nuway | Recessed system | Excellent | Excellent | High-traffic commercial | High |
| Coral Brush | Forbo | Textile tiles | Very good | Excellent | Offices & retail | Mid-High |
| Frontrunner | COBA Europe | Roll/mat | Good | Very good | General commercial | Mid |
| Waterhog | Andersen | Mats/tiles | Excellent | Very good | All-weather entrances | Mid-High |
| Safe-Flex | Ergo Advantage | Modular tiles | Good | Good | Industrial entrances | Mid |
| Milliken Obex | Milliken | Modular tiles | Very good | Excellent | Premium commercial | High |
Our Top Picks
Nuway Tuftiguard
by Nuway
Nuway Tuftiguard is the premium choice for high-traffic commercial entrances. The aluminium grid system with replaceable textile inserts provides exceptional dirt scraping and moisture absorption. Designed for recessed installation, it handles thousands of daily foot movements.
Specifications
- Type: Recessed aluminium system
- Inserts: Textile, brush, or scraper
- Installation: Mat well required
- Traffic rating: Heavy commercial
Strengths
- ✓ Exceptional performance
- ✓ Replaceable inserts
- ✓ Very long lifespan
- ✓ UK manufactured
Limitations
- ✗ High initial cost
- ✗ Requires mat well installation
- ✗ Professional installation needed
Best for: Shopping centres, office headquarters, hospitals, universities, and any building with very high foot traffic.
Forbo Coral Brush
by Forbo Flooring
Coral Brush tiles combine excellent dirt and moisture capture with attractive design options. The modular tile format allows creative patterns and easy replacement of worn sections. Popular in offices, retail, and hospitality.
Strengths
- ✓ Excellent dirt capture
- ✓ Design flexibility
- ✓ Modular — easy maintenance
- ✓ Good colour range
Limitations
- ✗ Mid-high pricing
- ✗ Requires adhesive installation
- ✗ Regular cleaning needed
Best for: Corporate offices, retail stores, hotels, and commercial buildings wanting attractive functional entrance matting.
Andersen Waterhog
by Andersen Company
The Waterhog name has become synonymous with entrance matting for good reason. The unique "water dam" border and crush-resistant polypropylene fibres handle UK weather exceptionally well, trapping moisture and preventing it spreading to interior floors.
Strengths
- ✓ Excellent moisture absorption
- ✓ Water dam border
- ✓ Crush-resistant fibres
- ✓ Indoor/outdoor use
Limitations
- ✗ Limited design options
- ✗ US manufactured
- ✗ Can look utilitarian
Best for: Building entrances exposed to heavy rain, schools, leisure centres, and any location prioritising wet weather performance.
COBA Frontrunner
by COBA Europe
COBA's Frontrunner offers solid entrance matting performance at a competitive price point. The vinyl-backed textile handles moderate traffic well and is available in rolls and mats for flexible installation. A practical choice for budget-conscious projects.
Strengths
- ✓ Competitive pricing
- ✓ UK manufacturer
- ✓ Good general performance
- ✓ Roll and mat options
Limitations
- ✗ Not for very high traffic
- ✗ Basic design options
- ✗ Shorter lifespan than premium
Best for: Small offices, retail units, and general commercial buildings with moderate traffic and budget constraints.
Safe-Flex Modular Matting
by Ergo Advantage
While not a traditional entrance mat, Safe-Flex excels at industrial building entrances where its anti-fatigue and anti-slip properties create a smooth transition from outside to production areas. The R13 slip rating handles wet conditions, and the modular system adapts to any entrance configuration.
Strengths
- ✓ R13 slip rating — safe when wet
- ✓ Anti-fatigue properties
- ✓ Seamless transition to production
- ✓ UK manufactured
Limitations
- ✗ Limited moisture absorption
- ✗ Industrial appearance
- ✗ Not designed for dirt scraping
Best for: Factory entrances, warehouse loading areas, and industrial buildings where the entrance transitions directly to production or storage areas.
Request Free SampleWhat to Consider When Buying Entrance Matting
Traffic Volume
Match matting specification to your foot traffic. High-traffic buildings (500+ people daily) need heavy-duty systems like recessed aluminium. Moderate traffic (100-500) suits quality textile tiles. Light traffic can use standard barrier mats.
Weather Exposure
Consider your entrance's exposure to weather. Covered entrances need less aggressive moisture management than exposed doorways. UK weather means prioritising moisture absorption for most buildings.
Installation Type
Recessed (mat well) installation is ideal but requires building work. Surface-mounted mats are simpler but create a step change. For new builds, specify mat wells. For existing buildings, choose mats with bevelled edges to minimise trip hazards.
Maintenance Requirements
All entrance matting needs regular cleaning to maintain performance. Consider whether you'll maintain in-house or use a rental service. Rental services provide regular exchange of clean mats but have ongoing costs.
Aesthetics
For corporate offices and retail, entrance matting is part of the first impression. Premium textile systems offer design flexibility. For industrial and back-of-house entrances, function trumps appearance.
Budget
Premium systems cost more upfront but last longer and perform better. Calculate total cost of ownership including installation, maintenance, and replacement cycles. Often, quality matting proves more economical long-term.
Frequently Asked Questions
What is the best entrance matting for commercial buildings?
For commercial buildings, a three-zone matting system is most effective: scraper matting outside, scraper/wiper in the entrance, and moisture-absorbing matting inside. For high-traffic buildings, recessed aluminium systems like Nuway Tuftiguard provide excellent performance. For standard commercial use, textile tiles like Forbo Coral Brush offer good performance with design flexibility.
How much entrance matting do I need?
The general rule is 6-8 steps of matting (approximately 4-5 metres) to effectively remove moisture and dirt. Ideally, this includes outdoor scraper matting, a transition zone, and indoor absorption matting. Shorter runs are less effective — studies show most dirt removal occurs in the first 3 metres of matting.
What's the difference between barrier mats and entrance mats?
The terms are often used interchangeably. 'Barrier matting' typically refers to the function — creating a barrier against dirt and moisture entering a building. 'Entrance matting' describes the location. Both refer to matting systems designed to capture dirt, absorb moisture, and protect interior flooring.
Should entrance mats be recessed or surface-mounted?
Recessed matting (set into a mat well) provides a flush finish, eliminates trip hazards, and typically performs better as it can be thicker. Surface-mounted mats are easier to install and change but create a slight step. For new builds or refurbishments, recessed systems are preferred. For existing buildings, quality surface mats with bevelled edges work well.
How often should entrance matting be cleaned?
High-traffic entrance matting should be vacuumed daily and deep-cleaned weekly or fortnightly. Rental mat services typically exchange mats weekly. Recessed systems may need professional extraction cleaning monthly. Regular cleaning maintains performance — saturated or compacted matting can't effectively capture more dirt and moisture.
Can I use industrial anti-fatigue matting at entrances?
Industrial matting like Safe-Flex can work at industrial building entrances where its anti-fatigue and anti-slip properties are valued. However, for offices and retail, dedicated entrance matting with moisture absorption and dirt-scraping properties performs better. Safe-Flex is ideal for factory entrances transitioning to production areas.
What entrance matting is best for wet UK weather?
For UK weather, prioritise moisture absorption capacity. Polypropylene and nylon textiles absorb significant water — Andersen Waterhog is specifically designed for wet conditions. Ensure matting can handle your foot traffic volume without becoming saturated. In very high-traffic locations, consider rental services that exchange saturated mats regularly.
Are logo mats effective as entrance matting?
Logo mats serve branding purposes but vary in functional performance. Quality logo mats from established manufacturers can provide good dirt and moisture control. Budget printed mats often compromise on performance. If branding is important, specify logo mats that meet your functional requirements rather than selecting on appearance alone.
Conclusion
Effective entrance matting is an investment that protects your building, reduces cleaning costs, and improves safety. The right system depends on your traffic levels, building type, and budget.
For high-traffic commercial buildings, recessed systems like Nuway Tuftiguard provide the best long-term performance. For offices and retail, Forbo Coral Brush balances function with aesthetics. For wet weather performance, Andersen Waterhog remains a proven choice.
For industrial buildings, consider how entrance matting integrates with your production areas. Safe-Flex provides a versatile solution that handles wet conditions while offering anti-fatigue benefits as workers transition into production spaces.
Whatever your choice, ensure adequate matting length (minimum 4-5 metres), establish regular cleaning schedules, and consider the three-zone approach for maximum effectiveness.
Need Industrial Entrance Matting?
Safe-Flex modular matting provides slip-safe, anti-fatigue flooring for industrial building entrances. UK-manufactured from 100% recycled PVC. Request free samples dispatched within 1 working day.